[opencms-dev] some opencms whitepaper?
Apostoly Guillaume
ApostolyG at mail.europcar.com
Wed Jul 16 17:48:01 CEST 2003
The best is to use the JavaDoc for the functions (I downloaded the source
and generated it). For the rest, the alkacon website is ok and you can
install OpenCMS documentation modules which show you some good development
and administration samples (you must have installed opencms for that last
point).
Hope this helps,
Regards,
Guillaume.
> -----Message d'origine-----
> De: Anthony Alvarado R [mailto:aalvarado at andreatanzi.com]
> Date: mercredi 16 juillet 2003 17:27
> À: opencms-dev at opencms.org
> Objet: [opencms-dev] some opencms whitepaper?
>
>
> Some url to a opemCms whitepaper?
> Functions, specs, etc...
>
> Regards
>
>
>
>
> -----Original Message-----
> From: opencms-dev-admin at opencms.org
> [mailto:opencms-dev-admin at opencms.org] On Behalf Of
> opencms-dev-request at opencms.org
> Sent: Wednesday, July 16, 2003 8:29 AM
> To: opencms-dev at opencms.org
> Subject: opencms-dev digest, Vol 1 #282 - 10 msgs
>
> Send opencms-dev mailing list submissions to
> opencms-dev at opencms.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://mail.opencms.org/mailman/listinfo/opencms-dev
> or, via email, send a message with subject or body 'help' to
> opencms-dev-request at opencms.org
>
> You can reach the person managing the list at
> opencms-dev-admin at opencms.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of opencms-dev digest..."
>
>
> Today's Topics:
>
> 1. RE:RE: [opencms-dev] OpenCms in Banks/financial institutions
> (openCMS)
> 2. Tomcat 5 (Mark Miller)
> 3. Re: Export question (stylesheet, images, dynamic sources and
> other resources) (=?iso-8859-1?B?Qmr2cm4gQWJlcnRp?=)
> 4. AW: [opencms-dev] Export question (stylesheet, images, dynamic
> sources and other resources) (Mark Miller)
> 5. Re: Export question (stylesheet, images, dynamic
> sources and other resources) (=?iso-8859-1?q?Thomas_M=E4rz?=)
> 6. Export trouble (Sven Dittmar)
> 7. Re: Export trouble (=?iso-8859-1?q?Thomas_M=E4rz?=)
> 8. Installation on OSX - fun and joy! (Sam Easterby-Smith)
>
> --__--__--
>
> Message: 1
> Date: Wed, 16 Jul 2003 07:52:47 -0300
> Subject: RE:RE: [opencms-dev] OpenCms in Banks/financial institutions
> To: opencms-dev at opencms.org
> From: "openCMS" <opencms at oriens.com.br>
> Reply-To: opencms-dev at opencms.org
>
> Thank you, I will check the slides.
>
> Walter
>
> >Hi
> >
> >http://www.lgt.com/
> >
> >If i'm right it's also mentioned in the opencms power-point slides
> >of alkacon. The presentation is downloadable from the opencms site.
> >
> >Greez
> >Cyrill
>
>
> --__--__--
>
> Message: 2
> From: "Mark Miller" <mark.miller at hema.ch>
> To: "OpenCMS Mailing List" <opencms-dev at opencms.org>
> Date: Wed, 16 Jul 2003 13:15:11 +0200
> Subject: [opencms-dev] Tomcat 5
> Reply-To: opencms-dev at opencms.org
>
> This is a multi-part message in MIME format.
>
> ------=_NextPart_000_0011_01C34B9C.49FBDC90
> Content-Type: text/plain;
> charset="us-ascii"
> Content-Transfer-Encoding: 7bit
>
> Has anyone tried OpenCMS with Tomcat 5 Alpha ?
>
> ------=_NextPart_000_0011_01C34B9C.49FBDC90
> Content-Type: text/html;
> charset="us-ascii"
> Content-Transfer-Encoding: quoted-printable
>
> <html xmlns:o=3D"urn:schemas-microsoft-com:office:office" =
> xmlns:w=3D"urn:schemas-microsoft-com:office:word" =
> xmlns=3D"http://www.w3.org/TR/REC-html40">
>
> <head>
> <META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
> charset=3Dus-ascii">
>
>
> <meta name=3DProgId content=3DWord.Document>
> <meta name=3DGenerator content=3D"Microsoft Word 10">
> <meta name=3DOriginator content=3D"Microsoft Word 10">
> <link rel=3DFile-List href=3D"cid:filelist.xml at 01C34B9C.49575F30">
> <!--[if gte mso 9]><xml>
> <o:OfficeDocumentSettings>
> <o:DoNotRelyOnCSS/>
> </o:OfficeDocumentSettings>
> </xml><![endif]--><!--[if gte mso 9]><xml>
> <w:WordDocument>
> <w:SpellingState>Clean</w:SpellingState>
> <w:GrammarState>Clean</w:GrammarState>
> <w:DocumentKind>DocumentEmail</w:DocumentKind>
> <w:HyphenationZone>21</w:HyphenationZone>
> <w:EnvelopeVis/>
> <w:Compatibility>
> <w:BreakWrappedTables/>
> <w:SnapToGridInCell/>
> <w:WrapTextWithPunct/>
> <w:UseAsianBreakRules/>
> </w:Compatibility>
> <w:BrowserLevel>MicrosoftInternetExplorer4</w:BrowserLevel>
> </w:WordDocument>
> </xml><![endif]-->
> <style>
> <!--
> /* Style Definitions */
> p.MsoNormal, li.MsoNormal, div.MsoNormal
> {mso-style-parent:"";
> margin:0cm;
> margin-bottom:.0001pt;
> mso-pagination:widow-orphan;
> font-size:12.0pt;
> font-family:"Times New Roman";
> mso-fareast-font-family:"Times New Roman";
> mso-ansi-language:EN-GB;}
> a:link, span.MsoHyperlink
> {color:blue;
> text-decoration:underline;
> text-underline:single;}
> a:visited, span.MsoHyperlinkFollowed
> {color:purple;
> text-decoration:underline;
> text-underline:single;}
> span.EmailFormatvorlage17
> {mso-style-type:personal-compose;
> mso-style-noshow:yes;
> mso-ansi-font-size:10.0pt;
> mso-bidi-font-size:10.0pt;
> font-family:Arial;
> mso-ascii-font-family:Arial;
> mso-hansi-font-family:Arial;
> mso-bidi-font-family:Arial;
> color:windowtext;}
> @page Section1
> {size:595.3pt 841.9pt;
> margin:70.85pt 70.85pt 2.0cm 70.85pt;
> mso-header-margin:35.4pt;
> mso-footer-margin:35.4pt;
> mso-paper-source:0;}
> div.Section1
> {page:Section1;}
> -->
> </style>
> <!--[if gte mso 10]>
> <style>
> /* Style Definitions */=20
> table.MsoNormalTable
> {mso-style-name:"Normale Tabelle";
> mso-tstyle-rowband-size:0;
> mso-tstyle-colband-size:0;
> mso-style-noshow:yes;
> mso-style-parent:"";
> mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
> mso-para-margin:0cm;
> mso-para-margin-bottom:.0001pt;
> mso-pagination:widow-orphan;
> font-size:10.0pt;
> font-family:"Times New Roman";}
> </style>
> <![endif]-->
> </head>
>
> <body lang=3DDE link=3Dblue vlink=3Dpurple =
> style=3D'tab-interval:35.4pt'>
>
> <div class=3DSection1>
>
> <p class=3DMsoNormal><font size=3D2 face=3DArial><span lang=3DEN-GB =
> style=3D'font-size:
> 10.0pt;font-family:Arial'>Has anyone tried OpenCMS with
> Tomcat 5 Alpha =
> ?<o:p></o:p></span></font></p>
>
> </div>
>
> </body>
>
> </html>
>
> ------=_NextPart_000_0011_01C34B9C.49FBDC90--
>
>
> --__--__--
>
> Message: 3
> From: =?iso-8859-1?B?Qmr2cm4gQWJlcnRp?= <bjoern_al at hotmail.com>
> To: opencms-dev at opencms.org
> Subject: Re: [opencms-dev] Export question (stylesheet,
> images, dynamic
> sources and
> other resources)
> Date: Wed, 16 Jul 2003 11:35:27 +0000
> Reply-To: opencms-dev at opencms.org
>
> Hi Thomas,
>
> > > The first is where it exports the stylesheet I've created in my
> > > resources directory. If I watch the page in the real file
> system, it
> > > seems that the stylesheet is ignored. I didn't find it in my file
> > > system. So where is my 'resources'-stuff?
> >Did you set the property "export" to "true"? You can also set the
> >property "exportname" to a folder
>
> Yes I have set the property "export" to "true". My 'staticexport.path'
> is
> set to a folder in htdocs of Apache. A property 'exportname' does not
> exist
> in my properties file. The stylesheet is still not to find.
>
> >e. g. "/my/resources/" for "/system/modules/.../resources/".
>
> I don't understand that example. Where do I have to specify
> "/my/resources/"
> and whats the relationship to "/system/modules/.../resources/"?
>
>
> > > Second question: Where does it place the images I took
> from my hard
> > > disk? I've read that I have to create an image gallery!?
> >By default the folder "/system/galleries/pics/" to "/pics/".
>
> Ok, I used a picture gallerie, and it has exported the picture to
> "/pics/".
> But the link to the picture is wrong. It still uses the reference from
> the
> VFS.
>
> > > Third question: Dynamic sources like PHP and JSP are normally put
> into
> > > the folder /Web-INF/export/. Is that right? In this folder I only
> have
> >No. The static export folder is defined in
> "opencms.properties" and the
> >default value is "$CATALINA_HOME/${WEB_APP_NAME}/export". Take a look
> at
> >"staticexport.path". For more information about JSP and OpenCms read
> the
> >documentation. All the statically exported files are put into the
> folder
> >"staticexport.path".
> >
> > > another folder modules with zips, which don't contain my
> files I've
> > > created.
> >,----[ /WEB-INF/export/readme.txt ]
> >| In this folder (export) OpenCms stores all exportes zip-files. You
> can
> >put
> >| your own exported zip-files here to import them via the database
> >administration.
> >`----
> >
> > > Since I like to use PHP I've followed the instructions of
> > > Joachim Arrasz to use the jk connector and then to put my
> PHP-files
> > > into htdocs folder of Apache. I think Opencms ignores my
> PHP file at
> > > all. I cannot find it on my hard drive. So what am I doning wrong?
> >Set the values of "staticexport.path" to your htdocs folder.
> Maybe you
> >didn't export your files statically.
>
> If I use a simple text file, and give it the extension ".php" it would
> work,
> but then it doesn't appear in the navigation, since it's no html file
> and I
> cannot include my templates.
>
> If I use a html file, I cannot add a php script.
>
> If I use a JSP file, it also doesn't work.
>
> This is a very big problem for me.
>
> Any ideas?
>
> Tanks for your help
>
> Regards
>
> Björn
>
> _________________________________________________________________
> Hotmail - Absolut kostenfrei! Der weltweit größte E-Mail-Anbieter im
> Netz:
> http://www.msn.de/hotmail
>
>
> --__--__--
>
> Message: 4
> From: "Mark Miller" <mark.miller at hema.ch>
> To: <opencms-dev at opencms.org>
> Subject: AW: [opencms-dev] Export question (stylesheet,
> images, dynamic
> sources and other resources)
> Date: Wed, 16 Jul 2003 13:51:28 +0200
> Reply-To: opencms-dev at opencms.org
>
> To include script files (asp ... but it doesn=92t matter ... you can =
> also
> use php) .. I did the following ... (just change all references of asp
> to php)
>
> 1. Create a jsp page in my main html directory called kontakt.asp (ie.
> becomes kontakt.asp.jsp)
>
> 2. Added the nav properties to the page, NavText and NavPos manually
>
> 3. Edited the sourcecode to
> -----------------------------------------------
> <%@ page session=3D"false" %>
> <%@ taglib prefix=3D"cms" uri=3D"http://www.opencms.org/taglib/cms" %>
> <cms:include
> file=3D"/system/modules/ch.xxx.www/jsptemplates/maintemplate.jsp"
> element=3D"head"/>
> <b>Kontakt</b>
> <p align=3D'center'>
> <cms:include
> file=3D"/system/modules/ch.xxx.www/resources/includes/kontakt.asp"
> element=3D"body"/></p>
> <cms:include file=3D"/system/modules/ch.xxx.www/jsptemplates/
> maintemplate.jsp" element=3D"foot"/>
> -----------------------------------------------
> This simply includes the head and foot of my main template
> and includes
> a script file
>
> 4. Added the script file as a plain file called kontakt.asp to
> /system/modules/ch.xxx.www/resources/includes/
>
> 5. That=92s it =85.
>
> -----Urspr=FCngliche Nachricht-----
> Von: opencms-dev-admin at opencms.org
> [mailto:opencms-dev-admin at opencms.org] Im Auftrag von Bj=F6rn Aberti
> Gesendet: 16 July 2003 13:35
> An: opencms-dev at opencms.org
> Betreff: Re: [opencms-dev] Export question (stylesheet,
> images, dynamic
> sources and other resources)
>
>
> If I use a simple text file, and give it the extension ".php" it would
> work,=20
> but then it doesn't appear in the navigation, since it's no html file
> and I=20
> cannot include my templates.
>
> If I use a html file, I cannot add a php script.
>
> If I use a JSP file, it also doesn't work.
>
> This is a very big problem for me.
>
> Any ideas?
>
> Tanks for your help
>
> Regards
>
> Bj=F6rn
>
> _________________________________________________________________
> Hotmail=A0 - =A0Absolut kostenfrei! Der weltweit gr=F6=DFte =
> E-Mail-Anbieter im
> Netz:=20
> http://www.msn.de/hotmail
>
> _______________________________________________
> This mail is send to you from the opencms-dev mailing list
> To change your list options, or to unsubscribe from the list, please
> visit
> http://mail.opencms.org/mailman/listinfo/opencms-dev
>
>
> --__--__--
>
> Message: 5
> To: opencms-dev at opencms.org
> Subject: Re: [opencms-dev] Export question (stylesheet,
> images, dynamic
> sources and other resources)
> From: =?iso-8859-1?q?Thomas_M=E4rz?= <thomasmaerz at gmx.de>
> Date: Wed, 16 Jul 2003 13:56:06 +0200
> Reply-To: opencms-dev at opencms.org
>
> Hello Björn,
>
> Björn Aberti <bjoern_al at hotmail.com> writes:
> >> > The first is where it exports the stylesheet I've created in my
> >> > resources directory. If I watch the page in the real file system,
> it
> >> > seems that the stylesheet is ignored. I didn't find it in my file
> >> > system. So where is my 'resources'-stuff?
> >>Did you set the property "export" to "true"? You can also set the
> >>property "exportname" to a folder
> >
> > Yes I have set the property "export" to "true". My
> 'staticexport.path'
> > is set to a folder in htdocs of Apache. A property 'exportname' does
> > not exist in my properties file. The stylesheet is still
> not to find.
> >
> >>e. g. "/my/resources/" for "/system/modules/.../resources/".
> >
> > I don't understand that example. Where do I have to specify
> > "/my/resources/" and whats the relationship to
> > "/system/modules/.../resources/"?
> Take a look at the property "exportname" of the folder
> "/sytem/galleries/pics/". The files in that folder are placed, when
> being
> exported to the /real/ file system, in the folder
> "$staticexport.path/pics/".
>
>
> >> > Second question: Where does it place the images I took
> from my hard
> >> > disk? I've read that I have to create an image gallery!?
> >>By default the folder "/system/galleries/pics/" to "/pics/".
> >
> > Ok, I used a picture gallerie, and it has exported the picture to
> > "/pics/". But the link to the picture is wrong. It still uses the
> > reference from the VFS.
> Take a look at the examples, especially to "cms.link()".
>
> > If I use a simple text file, and give it the extension
> ".php" it would
> > work, but then it doesn't appear in the navigation, since
> it's no html
> > file and I cannot include my templates.
> Create a new "page" with the extension ".php", add a property
> e. g. "php_code=/my/php/test.php" and include the code by
> your template
> by reading the property, so you can use different code for each page.
>
> Take a look at http://62.245.145.118/de/ ; it combines PHP
> and OpenCms,
> e. g. the forum template is done by OpenCms resp. all templates, and
> they use sometimes also PHP-content.
>
> Best Regards,
> Thomas Maerz
>
>
> --__--__--
>
> Message: 6
> Date: Wed, 16 Jul 2003 14:21:40 +0200
> From: Sven Dittmar <dittmar at rus.uni-stuttgart.de>
> Organization: Universitaet Stuttgart
> To: opencms-dev at opencms.org
> Subject: [opencms-dev] Export trouble
> Reply-To: opencms-dev at opencms.org
>
> Hi all,
>
> I have trouble exporting some projects from 5rc2 to 5.0final.
>
> I think this is related to a "trick" we used.
>
> We needed to have to different projects rendering pages with
> different
> templates but with the same *content*. So one project is the
> "master",
> the other is the slave.
>
> We did this with the XML-controlcode of the file.
>
> e.g. salve file ist
> studierende/studium/angebot/studiengaenge/geodaesie.html
>
> but in the controlfile of this file we call
>
> <TEMPLATE>/system/bodies/interessierte/studium/angebot/studien
> gaenge/geo
> daesie.html</TEMPLATE>
>
> which points to the master project.
>
> This works fine for us. Except for the exporting.
>
> I get the following error messages:
>
> [16.07.2003 14:17:50] <opencms_critical>
> com.opencms.core.CmsException: [com.opencms.file.mySql.CmsDbAccess]
> /default/vfs/system/bodies/studierende/studium/angebot/studien
> gaenge/geo
> daesie.html
>
> Exception com.opencms.core.CmsException: 2 Not found. Detailed error:
> [com.opencms.file.mySql.CmsDbAccess]
> /default/vfs/system/bodies/studierende/studium/angebot/studien
> gaenge/geo
> daesie.html.
> at com.opencms.file.mySql.CmsDbAccess.readFile(CmsDbAccess.java:703)
> at
> com.opencms.file.genericSql.CmsResourceBroker.readFile(CmsReso
> urceBroker
> .java:5299)
> at com.opencms.file.CmsObject.readFile(CmsObject.java:2954)
> at com.opencms.file.CmsExport.addSingleFiles(CmsExport.java:369)
> at com.opencms.file.CmsExport.addPageBodyFiles(CmsExport.java:356)
> at com.opencms.file.CmsExport.<init>(CmsExport.java:294)
> at
> com.opencms.file.genericSql.CmsResourceBroker.exportResources(
> CmsResourc
> eBroker.java:2905)
> at com.opencms.file.CmsObject.exportResources(CmsObject.java:1493)
> at
> com.opencms.workplace.CmsAdminDatabaseExportThread.run(CmsAdmi
> nDatabaseE
> xportThread.java:118)
>
> Question: How can I get this projects exported correctly? Otherwise I
> can not upgrade to 5.0final...
>
> And: Are there ways to export the projects as well? The got completly
> lost in older version and I had to set them up manually
> before upgrading
>
> to a newer version.
>
> Regards,
> Sven
>
>
> --__--__--
>
> Message: 7
> To: opencms-dev at opencms.org
> Subject: Re: [opencms-dev] Export trouble
> From: =?iso-8859-1?q?Thomas_M=E4rz?= <thomasmaerz at gmx.de>
> Date: Wed, 16 Jul 2003 15:38:03 +0200
> Reply-To: opencms-dev at opencms.org
>
> Sven Dittmar <dittmar at rus.uni-stuttgart.de> writes:
> > We needed to have to different projects rendering pages
> with different
> > templates but with the same *content*. So one project is
> the "master",
> > the other is the slave.
> >
> > We did this with the XML-controlcode of the file.
> >
> > e.g. salve file ist
> studierende/studium/angebot/studiengaenge/geodaesie.html
> >
> > but in the controlfile of this file we call
> >
> >
> <TEMPLATE>/system/bodies/interessierte/studium/angebot/studien
> gaenge/geo
> daesie.html</TEMPLATE>
> >
> > which points to the master project.
> I am trying to do the same and it is working, too, but how
> did you solve
> this problem:
>
> I am using mastertemplates M1 and M2 and have two pages /1/p1
> and /2/p1
> using M1 resp. M2 but the same template /system/bodies/1/p1.
>
> Now the problem:
> I have a link in the content area of page /1/p1 to the page
> /1/p1/sub_p1
> but now I of course do _not_ want to use the same link in /2/p1, the
> link in /2/p1 should point to /2/p1/sub_p1, but i does not.
>
> Also using relative links didn't work; I tried using <a href="sub_p1">
> but then the exported page linked to
> "system/modules/mymodule/jsptemplates/sub_p1".
>
> Any suggestion?
>
> > This works fine for us. Except for the exporting.
> >
> > I get the following error messages:
> >
> > [16.07.2003 14:17:50] <opencms_critical>
> > com.opencms.core.CmsException:
> [com.opencms.file.mySql.CmsDbAccess]
> >
> /default/vfs/system/bodies/studierende/studium/angebot/studien
> gaenge/geo
> daesie.html
> >
> > Exception com.opencms.core.CmsException: 2 Not found.
> Detailed error:
> > [com.opencms.file.mySql.CmsDbAccess]
> >
> /default/vfs/system/bodies/studierende/studium/angebot/studien
> gaenge/geo
> daesie.html.
> > at com.opencms.file.mySql.CmsDbAccess.readFile(CmsDbAccess.java:703)
> Did you delete the "not needed" files in /system/bodies?
> If there aren't too many you could create them manually.
>
> > And: Are there ways to export the projects as well? The got
> completly
> > lost in older version and I had to set them up manually before
> > upgrading to a newer version.
> I don't know any way to export the project settings.
>
> Best Regards,
> Thomas Maerz
>
>
> --__--__--
>
> Message: 8
> Date: Wed, 16 Jul 2003 15:12:22 +0100
> From: Sam Easterby-Smith <lists at samscam.co.uk>
> To: opencms-dev at opencms.org
> Subject: [opencms-dev] Installation on OSX - fun and joy!
> Reply-To: opencms-dev at opencms.org
>
> Hi there.
>
> I am utterly new to Tomcat and OpenCms, and am attempting to get it
> running on Mac OSX Server
> (mainly to see if it's any cop ;-)
>
> So i've upgraded Tomcat from the pre-installed v3.something
> to a fresh
> copy of v4.1.24
>
> And low, the server works, the examples work, the opencms
> package is in
>
> the right place and I get as far as ocsetup (choosing standard or
> advanced) and then hang my head in shame as I get the torrent
> of errors
>
> given below. (on the content_encoding.jsp page)
>
> What else might help?
>
> java version "1.4.1_01"
> Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.1_01-39)
> Java HotSpot(TM) Client VM (build 1.4.1_01-14, mixed mode)
>
> If anyone has any ideas it would be much appreciated.
>
> Cheers,
> Sam
>
> -------------
>
> type Exception report
>
> message
>
> description The server encountered an internal error () that
> prevented
> it from fulfilling this request.
>
> exception
> org.apache.jasper.JasperException
> at
> org.apache.jasper.servlet.JspServletWrapper.service(JspServlet
> Wrapper.ja
>
> va:254)
> at
> org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet
> .java:295)
> at
> org.apache.jasper.servlet.JspServlet.service(JspServlet.java:241)
> at
> javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
> at
> org.apache.catalina.core.ApplicationFilterChain.internalDoFilt
> er(Applica
>
> tionFilterChain.java:247)
> at
> org.apache.catalina.core.ApplicationFilterChain.doFilter(Appli
> cationFilt
>
> erChain.java:193)
> at
> org.apache.catalina.core.StandardWrapperValve.invoke(StandardW
> rapperValv
>
> e.java:256)
> at
> org.apache.catalina.core.StandardPipeline$StandardPipelineValv
> eContext.i
>
> nvokeNext(StandardPipeline.java:643)
> at
> org.apache.catalina.core.StandardPipeline.invoke(StandardPipel
> ine.java:4
>
> 80)
> at
> org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
> at
> org.apache.catalina.core.StandardContextValve.invoke(StandardC
> ontextValv
>
> e.java:191)
> at
> org.apache.catalina.core.StandardPipeline$StandardPipelineValv
> eContext.i
>
> nvokeNext(StandardPipeline.java:643)
> at
> org.apache.catalina.core.StandardPipeline.invoke(StandardPipel
> ine.java:4
>
> 80)
> at
> org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
> at
> org.apache.catalina.core.StandardContext.invoke(StandardContex
> t.java:241
>
> 5)
> at
> org.apache.catalina.core.StandardHostValve.invoke(StandardHost
> Valve.java
>
> :180)
> at
> org.apache.catalina.core.StandardPipeline$StandardPipelineValv
> eContext.i
>
> nvokeNext(StandardPipeline.java:643)
> at
> org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDi
> spatcherVa
>
> lve.java:171)
> at
> org.apache.catalina.core.StandardPipeline$StandardPipelineValv
> eContext.i
>
> nvokeNext(StandardPipeline.java:641)
> at
> org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReport
> Valve.java
>
> :172)
> at
> org.apache.catalina.core.StandardPipeline$StandardPipelineValv
> eContext.i
>
> nvokeNext(StandardPipeline.java:641)
> at
> org.apache.catalina.core.StandardPipeline.invoke(StandardPipel
> ine.java:4
>
> 80)
> at
> org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
> at
> org.apache.catalina.core.StandardEngineValve.invoke(StandardEn
> gineValve.
>
> java:174)
> at
> org.apache.catalina.core.StandardPipeline$StandardPipelineValv
> eContext.i
>
> nvokeNext(StandardPipeline.java:643)
> at
> org.apache.catalina.core.StandardPipeline.invoke(StandardPipel
> ine.java:4
>
> 80)
> at
> org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
> at
> org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.
> java:223)
> at
> org.apache.coyote.http11.Http11Processor.process(Http11Process
> or.java:59
>
> 4)
> at
> org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandle
> r.processC
>
> onnection(Http11Protocol.java:392)
> at
> org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoi
> nt.java:56
>
> 5)
> at
> org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(
> ThreadPool
>
> .java:619)
> at java.lang.Thread.run(Thread.java:554)
>
>
>
> root cause
> java.lang.NullPointerException
> at
> com.opencms.boot.CmsSetup.getExtProperty(CmsSetup.java:163)
> at
> com.opencms.boot.CmsSetup.getDefaultContentEncoding(CmsSetup.j
> ava:1061)
> at
> org.apache.jsp.content_encoding_jsp._jspService(content_encodi
> ng_jsp.jav
>
> a:66)
> at
> org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:137)
> at
> javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
> at
> org.apache.jasper.servlet.JspServletWrapper.service(JspServlet
> Wrapper.ja
>
> va:210)
> at
> org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet
> .java:295)
> at
> org.apache.jasper.servlet.JspServlet.service(JspServlet.java:241)
> at
> javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
> at
> org.apache.catalina.core.ApplicationFilterChain.internalDoFilt
> er(Applica
>
> tionFilterChain.java:247)
> at
> org.apache.catalina.core.ApplicationFilterChain.doFilter(Appli
> cationFilt
>
> erChain.java:193)
> at
> org.apache.catalina.core.StandardWrapperValve.invoke(StandardW
> rapperValv
>
> e.java:256)
> at
> org.apache.catalina.core.StandardPipeline$StandardPipelineValv
> eContext.i
>
> nvokeNext(StandardPipeline.java:643)
> at
> org.apache.catalina.core.StandardPipeline.invoke(StandardPipel
> ine.java:4
>
> 80)
> at
> org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
> at
> org.apache.catalina.core.StandardContextValve.invoke(StandardC
> ontextValv
>
> e.java:191)
> at
> org.apache.catalina.core.StandardPipeline$StandardPipelineValv
> eContext.i
>
> nvokeNext(StandardPipeline.java:643)
> at
> org.apache.catalina.core.StandardPipeline.invoke(StandardPipel
> ine.java:4
>
> 80)
> at
> org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
> at
> org.apache.catalina.core.StandardContext.invoke(StandardContex
> t.java:241
>
> 5)
> at
> org.apache.catalina.core.StandardHostValve.invoke(StandardHost
> Valve.java
>
> :180)
> at
> org.apache.catalina.core.StandardPipeline$StandardPipelineValv
> eContext.i
>
> nvokeNext(StandardPipeline.java:643)
> at
> org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDi
> spatcherVa
>
> lve.java:171)
> at
> org.apache.catalina.core.StandardPipeline$StandardPipelineValv
> eContext.i
>
> nvokeNext(StandardPipeline.java:641)
> at
> org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReport
> Valve.java
>
> :172)
> at
> org.apache.catalina.core.StandardPipeline$StandardPipelineValv
> eContext.i
>
> nvokeNext(StandardPipeline.java:641)
> at
> org.apache.catalina.core.StandardPipeline.invoke(StandardPipel
> ine.java:4
>
> 80)
> at
> org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
> at
> org.apache.catalina.core.StandardEngineValve.invoke(StandardEn
> gineValve.
>
> java:174)
> at
> org.apache.catalina.core.StandardPipeline$StandardPipelineValv
> eContext.i
>
> nvokeNext(StandardPipeline.java:643)
> at
> org.apache.catalina.core.StandardPipeline.invoke(StandardPipel
> ine.java:4
>
> 80)
> at
> org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
> at
> org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.
> java:223)
> at
> org.apache.coyote.http11.Http11Processor.process(Http11Process
> or.java:59
>
> 4)
> at
> org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandle
> r.processC
>
> onnection(Http11Protocol.java:392)
> at
> org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoi
> nt.java:56
>
> 5)
> at
> org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(
> ThreadPool
>
> .java:619)
> at java.lang.Thread.run(Thread.java:554)
>
>
>
> Apache Tomcat/4.1.24
>
>
>
> --__--__--
>
> _______________________________________________
> This mail is send to you from the opencms-dev mailing list
> To change your list options, or to unsubscribe from the list, please
> visit
> http://mail.opencms.org/mailman/listinfo/opencms-dev
>
> End of opencms-dev Digest
>
>
>
> _______________________________________________
> This mail is send to you from the opencms-dev mailing list
> To change your list options, or to unsubscribe from the list,
> please visit
> http://mail.opencms.org/mailman/listinfo/opencms-dev
>
More information about the opencms-dev
mailing list